Reflector: 

The reflector of the luminaire is shifted in the basic body. The reflector is produced from white painted metal sheet, 0.5 mm thick. It can be produced also from aluminium profile. The electric components are mounted on it. Special profile is used for cover of electrical parts.

System of Fastening: 

The lighting fixtures can be fastened directly on the ceiling, respectively on the walls, of illuminated space by means of four screws. For changing of luminous source it necessary to push out the bearing ribbon out of luminaireApplication: 

The RAMBO-Ex luminaires are industrial dustproof and waterproof fluorescent fixtures, suitable for the lightening of premises with danger of explosion of flammable dust – zone 1,2 and for the lightening of premises with danger of explosion of flammable gas. The lighting fixture consists of a few main parts: body of the luminaire, reflector with equipment, sealing plug with bushing. The luminaires are certified by FTZÚ Ostrava – Radvanice (type examination certificate number FTZÚ 04 ATEX 0142X).

Body: 

The body of the lighting fixture is produced from white painted metal sheet, 2 mm thick. For outdoor areas and IP67 are recommended to use with body produced from galvanized sheet. The transparent polycarbonate tube is shifted inside and guarantees good mechanical resistance against impact. The flammability level of the material is B (difficult of flammability). The tube is ended off by the sealing plug with bushing M20x1,5 designed for the areas with danger of explosion. The whole body is ended by plastic sides from polycarbonate. The flammability level of this material is C1 (hard flammable). The imbus screws are used for the cross connection. The screws with special heads and special dismantling spanner are available on customeres request. This equipment does not enable the dismantling of RAMBO fixtures with common tools (developed for Prison Service CZ).